Description
CAN LOGGER
GRIPONE MICROLOG-01 is a CAN data logger designed for use in various fields (such as automotive, motorsport, laboratory analysis and monitoring, machinery monitoring, precision agriculture, industrial monitoring, process analysis, etc.) thanks to its data logging capability via CAN bus (specifically designed for sectors such as automotive and motorsport) and its ability to support CAN OBDII and J1939 protocols. The data logger is designed to acquire up to 16 signals.
A micro and easy to use module with many additional extensions
GRIPONE MICROLOG-01 records datas over a SD card. Thnaks to the CAN bus it can be integrated with our CAN-BOARD modules. Using the CAN-BOARD modules, you can add features to record additional data such as accelerometers, gyroscopes, geolocation, load cells, opto-isolated inputs, and more.
Massive Scalability: Acquire data from up to 16 inputs simultaneously.
Dynamic Sampling: Supports frequencies ranging from 0.01Hz to 200Hz, making it ideal for both long-term environmental monitoring and rapid dynamic analysis.
Ruggedized Design: Built with a Nylon PA12+35%GF enclosure and a waterproof SUPERSEAL 1.5 Series 4 pin automotive-grade connector, the unit boasts an IPX7 rating.
Extreme Resilience: Operates reliably in harsh conditions with a temperature range of -20°C to +85°C.
Key Performance Features
CAN bus: GUBELOG-03 includes a CAN bus by which you can extracts up to 16 signals simultaneously using a High-Speed CAN 2.0B transceiver. It supports OBD II, SAE J1939, ISOBUS (ISO 11783), and OpenCAN protocols
Additional modules: Using the CAN-BOARDs, you can add features to record additional data such as accelerometers, gyroscopes, geolocation, load cells, opto-isolated inputs, and more
SPECIFICATIONS
CAN Bus Interface
The system incorporates a CAN bus capable of handling up to 16 channels simultaneously.
Transceiver: High-Speed CAN 2.0B.
Protocols: Using the GUBELLINI DataStudio software, the CAN bus can be configured according to the OBD II, SAE J1939, ISOBUS (ISO 11783) and OpenCAN (EN-50325-4) protocols.
Termination: The 120-ohm termination resistor is built into the data logger.
Protection and Operating Environment
The Datalogger guarantees an IPX7 rating, allowing for use in harsh environments. The guaranteed operating temperature range is from -20°C to +85°C
Internal memory
The logged data is saved to an unformatted micro SD card (RAW format). The supported micro SD card capacities are 16, 32, 64 and 128 GB (larger capacities are supported but not utilised to their full capacity). The micro SD card can be removed and connected directly to a PC to retrieve the data (organised into datasets) using the dedicated function in GUBELLINI DataStudio.
Auto-Start Conditions
The data logger can manage the start of recording in two modes: “Always On” and “Auto-start Condition”. In “Always On” mode, the data logger generates a new dataset number and begins recording data from the active inputs immediately. The dataset closes when the device is switched off. In “Auto-Start Condition” mode, the data logger generates a new dataset number and begins recording data only after a condition has been met (linked to the value of one of the active inputs). The “Auto-Start” condition is programmable via software. The dataset is closed and recording stops when the device is switched off.
Artificial Intelligence
The GUBELLINI DataStudio data logger management software is equipped with an AI module called AI Analyst. AI Analyst is an innovative way of analysing the data recorded by the data logger. AI Analyst is not a simple AI “chatbot” to which you ask generic questions, but a fully-fledged multi-agent artificial intelligence system integrated into the software. It has been designed to assist you in analysing the acquired data, automating the search for anomalies, the creation of complex graphs and the drafting of professional reports.
Power supply
The device can be powered by a DC voltage of 7 to 24V. The main connector provides a 5V supply voltage for connected sensors.
USB-C connection
You can connect to the data logger via a USB-C connector located on the side of the enclosure and protected by a rubber gasket. The USB connection allows you to send and receive configuration data. To download the recorded data, you can remove the microSD card and connect it to your computer. Using the included software, you can download the datasets to your PC and export them in CSV format or analyze them.
Main Connector: JAE MX23A26NF1 (Automotive Grade)
o ensure maximum reliability in signal transmission and maintain the IPX7 waterproof certification, the physical interface of the
CAN bus is via a 4-pin AMP Super Seal 1.5 series connector (code 282106-1).
INCLUDED
The kit includes the datalogger, the USB cable and the GUBELLINI DataStudio (the complete suite for managing the datalogger, configuration and analysing of the data).
Dimensions
DOWNLOAD
You can find all the link (user manual, software) at the main page MICROLOG-01
