Description
GRIPONE QUICK SHIFTER is a benchmark among modern electronic gearboxes. Our electronic gearbox is the result of years of experience in developing traction control systems. The essence of sophistication and reliability. GRIPONE QUICK SHIFTER is very easy to configure: you can adjust the actuation sensitivity on the lever and the cut-off time. Everything else is done automatically by the GRIPONE control unit. The kit includes all you need to install GRIPONE QUICK SHIFTER on your motorcycle. The kit is completely plug&play so you do not need any modification on wiring loom or parts of the bike
Included into the kit
1 x ECU + Loom plug&play
1 x Load cell sensor
2 x Rod ends
2 x Rods 50mm
2 x Rods 90mm
4 x Set screws M6x30mm
1 x Set screw M6x90mm
4 x M6 nuts
2 x M6x20 bolts
2 x M6 lock nuts
FASTER ON TRACK, MORE FUNNY ON STREET
Enhance your emotions: the electronic gearbox allows you to improve acceleration because it reduces shift times. But the most important thing is that it allows you to change gear with less “shift shock,” i.e., the jolt that the engine produces on the transmission when the next gear is engaged.
Every jolt when changing gear is reduced by GRIPONE QUICK SHIFTER, increasing smoothness. You can change gear with the bike tilted without any wobbling. The bike will be more stable and safer.
ABSOLUTE CONTROL. INSTANT AND INTELLIGENT UPSHIFT
The main concern, expressed almost universally, is the risk of damaging the gearbox. Another common concern is that the system will perform poorly at low revs, resulting in “jerky” road performance. GRIPONE QUICK SHIFTER, on the other hand, increases smoothness and reduces shock on the transmission, thus also reducing gearbox problems.
ADAPTIVE TECHNOLOGY: THE PERFECT UP-SHIFT, EVERY TIME
Professional technology combined with a simple interface. Thanks to its racing-type full bridge load cell, GRIPONE QUICK SHIFTER measures the force applied to the lever and the speed at which that force is applied. The adaptive system adjusts the shift timing accordingly. In addition, the sensitivity threshold is slightly modified, anticipating the activation of the cut-off. This makes shifting almost “predictive”!!!
The advanced GRIPONE algorithm automatically adjusts the cut-off times based on engine speed and load, ensuring smooth shifting in all conditions. This directly counteracts the fear of rough running at low revs.
WIRING LOOM
The electrical installation is very easy and the kit is plug & play. We provide you with the complete device with wiring for connection to the original coil connectors on your motorcycle. Simply connect the coils of all cylinders to the GRIPONE wiring harness and a ground wire to the frame.
“FULL BRIDGE” LOAD CELL
The kit includes our load cell sensor. GRIPONE uses a “full bridge” load cell, which is the most professional solution among load cells. Other manufacturers have piezoelectric or “half bridge” sensors, which can have adjustment problems or be too sensitive. The “full bridge” solution, on the other hand, is the most reliable solution. To install the device, simply replace the gear shift pedal linkage rod with our rod with load cell. The sensor will detect the rider’s action with every gear change.
ADJUSTMENTS
GRIPONE QUICK SHIFTER is extremely easy to adjust. We have simplified user adjustment, keeping all the complex management algorithms inside the control unit. You simply need to adjust two trimmers: the first allows you to vary the sensitivity on the gear lever, while the second allows you to vary the shift time. The system will then adapt the sensitivity and shift times according to the situation (for example, by differentiating between low and high engine speeds).
